Sony HDC 950 with HKC-T950 adaptor

The Sony HDC 950 with HKC-T950 adaptor camera is a 3 CCD 2/3 inch High Definition camera where the optical block (HKC-T950) is split from the main camera body for utilisation as a lightweight and compact camera head without loss of picture quality and functionality. The camera, which is switchable across all the common HD formats (see below), can be used as part of a camera chain with SMPTE fibre back (fibre to triax adaptors also available) and CCU, or as a standalone unit for use with a HD microwave link or alternatively direct to tape, allowing for seamless integration into the HD broadcast and production environment.

The Sony HDC950 with HKC-T950 adaptor can be hired as a standalone unit or as part of a range of ACS high definition systems from remote heads to stabilised mounts and provides the perfect solution for High Definition POV, camera tracking and aerial broadcast applications without the need to compromise on camera performance.

Technical Specification

GENERAL 1080/50i, 60i, 30P, 25P, 24P
HD Formats 25W (in stand-alone use, without options)
Operating temperature
-20° C to +45° C (-4° F to +113° F)
Storage temperature -20° C to +50° C (-4° F to +122° F)
Mass Approx 5.1 kg (112 lb 7 oz)
Camera body dimemsions See below
(Unit: mm/inches  
Dimentions (Approx. W x H x D) Cable adapter: approx. 0.5 kg (1 lb 2 oz)
CCD block adapter: approx. 0.85 kg (1 lb 14 oz)
(adapter only)
approx. 1.65 kg (3 lb 10 oz) (with the CCD block)

CCD block adaptor I/F

Camera cable CCZ type 26 pin (Male)
MIC IN XLR-3 (Female)
VIDEO OUT (HD Y) BNC x 1
LENS 12 Pin
VF 20 Pin
INCOM XLR-5 (Female)
Cable adaptor I/F XLR-5 (Female)
Camera cable CCZ type 26pin (Female)
MIC OUT XLR-3 (Male)
VF 20 Pin
INCOM XLR-5 (Male)
IMAGER  
Imager 2/3-type frame interline transfer CCD
Method 3-CCD, RGB
Effective resolution 1920 (horizontal) x 1080 (Vertical)
ELECTRICAL CHARACTERISTICS
 
Sensitivity F10.0 (at 2000 lx with 89.9% reflectivity)
Minimum illumination 10 lux (F 1.4, +12dB gain up)
Image signal-to-noise ratio 54 dB or more (typical)
Horizontal resolution 1000 TV lines
Dynamic range (1080/60i mode) 600%
Registration Within 0.02 % (all zones, without lens)
Shutter speed selection (1080/60i) 1/100, 1/125, 1/250, 1/500, 1/1000,
1/2000 (s)

Gain selection

-3, 0, +3, +6, +12 dB
OPTICAL SYSTEM SPECIFICATIONS  
Spectral System F1.4 prism
Built-in filters Color temperature
conversion filters
A: cross filter
B: 3200K (clear)
C: 4300K
D: 6300K
E: 8000K
ND filters
1: clear
2: 1/4 ND
3: 1/8 ND
4: 1/16 ND
5: 1/64 ND
Servo filter control Yes

Lens mount

Sony bayonet mount
Laser Diode Properties  
Material InGaAsP
Wave length: 1310 ± 40nm
Emission duration: Continuous
Laser output power: 141 +37 -19 mW
INPUT/OUTPUT CONNECTORS  
Optical fibre cable interface SMPTE 304M based optical fibre
connector (x1)
1.5 Gb/s optical fibre digital transmission,
SMPTE 292M, DC 180V
VTR CCZ, 26-pin (1)
CCU Electro-multi connector (1)
Lens 12-pin (1)
VF 20-pin (1)
MIC IN XLR 3-pin, female (1)
AUDIO IN 1, 2 XLR 3-pin, female (1)
EARPHONE OUT Minijack (1), 8 ohms
DC IN XLR 4-pin (1), 10.5 to 17 V DC
DC OUT 4-pin (1), 10.5 to 17 V DC, 5W maximum
HD SERIAL OUT BNC type (1)
INCOM1 and 2 XLR 5-pin, female (1)
TEST OUT BNC type (1)
GENLOCK IN/RET IN/PROMPT OUT BNC type (1), 1 Vp-p, 75 ohms
RET CONT 6-pin (1)
REMOTE 8-pin (1)
TRACKER 20-pin (1)
EXT I/O 20-pin (1)

 

 

 

 

Lens mount

Sony bayonet mount
Laser Diode Properties  
Material InGaAsP
Wave length: 1310 ± 40nm
Emission duration: Continuous
Laser output power: 141 +37 -19 mW
INPUT/OUTPUT CONNECTORS  
Optical fibre cable interface SMPTE 304M based optical fibre
connector (x1)
1.5 Gb/s optical fibre digital transmission,
SMPTE 292M, DC 180V
VTR CCZ, 26-pin (1)
CCU Electro-multi connector (1)
Lens 12-pin (1)
VF 20-pin (1)
MIC IN XLR 3-pin, female (1)
AUDIO IN 1, 2 XLR 3-pin, female (1)
EARPHONE OUT Minijack (1), 8 ohms
DC IN XLR 4-pin (1), 10.5 to 17 V DC
DC OUT 4-pin (1), 10.5 to 17 V DC, 5W maximum
HD SERIAL OUT BNC type (1)
INCOM1 and 2 XLR 5-pin, female (1)
TEST OUT BNC type (1)
GENLOCK IN/RET IN/PROMPT OUT BNC type (1), 1 Vp-p, 75 ohms
RET CONT 6-pin (1)
REMOTE 8-pin (1)
TRACKER 20-pin (1)
EXT I/O 20-pin (1)

 

Aerial Camera Systems